ALUCOBOND® PLUS
MAC CLADDING can hep supply and install Alucobond plus:
ALUCOBOND® PLUS Aluminium Composite Material (ACM) shall be 3mm/4mm/6mm thick and consist of 2 layers of 0.5mm thick aluminium sandwiching a mineral filled fire resistant core containing 70% non combustible mineral filling. The aluminium skins shall be of alloy AlMg 1- NS41 (EN AW 5005A nearest equivalent) having an ultimate strength of 130 MPa and 0.2% proof stress of 90 MPa.
With its 5005 marine grade alloy, ALUCOBOND® PLUS is ideal for projects that are within close proximity to water.
Core materials containing re used core material, which could contain other impurities proven to be detrimental to the integrity and long term performance of laminated materials shall not be used.
The face sheet of aluminium shall be finished in a factory applied fluoropolymer (PVDF or FEVE) high performance coil coating in accordance with EN13523, ECCA Quality Label and Voluntary Specification AAMA 2605-11. Note: Spray applied coatings are not acceptable. Rear face aluminium sheet to be left in chemically cleaned mill finish condition unless noted otherwise.
Front face sheet, shall be factory pre finished in colour or finish selected from the manufacturers:
• Standard Colour Range
• Spectra Colour Range
• NaturAL Range
• Anodized Look Colour Range
• Design Unlimited Range
• Urban Design Range
Alucobond installer Melbourne wide location, Non standard colours or finishes to customers selection will be subject to minimum order quantities. Applied coatings shall be protected by UV stabilized strippable foil, and should be removed within 3 months of installation on external façade. ALUCOBOND® PLUS shall be CodeMark Certified for use as external cladding on buildings of type A, B and C construction and shall have been tested to the following Australian & International Fire Standards
Contact us if you are looking for an Alucobond installer melbourne wide as we can help